FGD Series Weatherproof High...

Ordering Information

Product Type: FGD
◆ Follow the product nomenclature for selection.
For example: pole height, pole type, number of light fitting, type of light fitting, power, lamp panel, control mode, executive standard form (such as Chinese National standard, International standard, European standard and American standard)etc.
◆ The high pole lamp is a complex project involving mechanical,electrical, optical, and civil engineering and structure, so pleasecontact with our engineering and technical personnel to make preferred plan.
◆ All high-pole lamps are provided with corresponding ballast and capacitors, the lamp source shall be prepared by user.
◆ All anchor bolts of high-pole lamps are prepared by users, and the schematic diagram is provided for reference.
◆ Executive standards:
GB50017 Code for Design of Steel Structures, GBJ135 High Rise Structure Design Specification, GB50011 Code of Aseismic Design of Buildings, GB 50007 Code for Design of Building Foundation, CJ/T3076 Technical Conditions of High Pole Lighting Facilities, GB699 High Quality Carbon Structure Steel Technical Conditions, GB/T13912 Metal Covering Layer Steel Work Pieces Hot Dip
Galvanizing Technology Requirements.
The high pole lamp is of compact and firm structure, easy assembly and maintenance. Lift systems and electrical systems can work reliably, with reasonable light distribution, uniform illumination, and lighting range up to more than 3000 square meters. Lamp panel style can be made upon users’ request or based on engineering needs.
◆ Lamp pole
1) Light pole is made of high-quality low-carbon steel plate through shear, bending, and automatic welding. Stainless steel light poles can be made upon request.
2) All the steel components are of hot dip galvanized and powder coated so that all internal and external wall surfaces are protected properly to extend the service life and save maintenance costs.
3) There are electrical door at the bottom of the light pole, with built-in automatic and manual lifting system and electrical control system. A specially designed lock is equipped on the door to effectively avoid being opened by non-staffs.
◆ Electrical control system
1) Electrical control and protection devices are installed and fixed inside the control box at the bottom of lamp, equipped with lighting control and motor control circuit.
2) With manual control master controller to achieve remote control of lifting (about 5 meters).
3) Double-loop power cables for power supply, to achieve full load lighting and partial lighting, with a variety of ways for control, such as manual control, light control and computer time control, etc. to meet the needs of different users.
4) Towlines are used for power supply, control box and lighting cables are connected with specific plugs which have special locking device.
◆ Automatic and manual lifting system
The system is composed of motor, worm gear, and hoist. Worm gear drive mechanism with self-locking function can make the lamp panel stop at any location, and over torque protection is set, automatic operations and manual operations are available.
◆ Guiding and brake system (optional)
This system play a guiding role in the normal rise and fall of lamp panel once the wire rope breaks, this system has brake protection, it can prevent lamp panel from falling.
◆ Lightning protection grounding device
The high-pole lamp must have a dedicated grounding device, grounding resistance less than 10 ohms
HS code: 841510
Country of origin: China