15 September, 2026
Specifying explosion proof cable glands for an offshore wind farm starts with the cable data sheet and the area classification drawing, not with a product catalogue. I have watched project schedules s...
Blog
14 September, 2026
Zone 2 explosion proof VFD enclosures for motor speed control are not simply a certified steel box around a drive. In projects I have reviewed, too many specifications lock the Ex rating first and lea...
13 September, 2026
Factory acceptance testing for explosion proof electrical equipment is not a formality, and treating it that way transfers risk from the factory to your site. Over more than thirty years working on ha...
12 September, 2026
Modular explosion proof distribution cabinets give EPC project teams a way to manage schedule risk, but only when the design freeze is disciplined. Most supplier content stops at enclosure material an...
11 September, 2026
Explosion proof distribution cabinets with energy metering create a coordination problem before they ever create a data point. Operations wants consumption data, the instrumentation team wants signals...
10 September, 2026
SOLAS compliant explosion proof marine equipment is not defined by a single certificate on the nameplate. It is the alignment of three document sets: the Ex certificate under IEC 60079, the marine typ...
9 September, 2026
Class 1 Division 1 explosion proof lights carry a UL listed mark to confirm that the complete luminaire can contain an internal ignition. The mark is gas group specific and temperature class specific....
8 September, 2026
Refinery buyers do not lose projects because the available product range is too narrow. They lose time and budget when a lighting circuit specified for a IIB gas group is installed in a unit that shou...
7 September, 2026
Explosion proof control panels with PLC integration fail most often because the panel is ordered as a certified enclosure rather than a complete controlled system. The purchaser confirms the explosion...
6 September, 2026
Temperature class T1 to T6 is not a quality grade. It sets the maximum surface temperature an explosion proof device can reach in normal operation or under fault conditions. Matching the equipment T c...